CNC machine tools in order to maintain a good status, apart from the failure to timely repair, maintenance always insist it is very important. Insist on regular inspections, regular maintenance, you can put lot of potential eradication failure in the bud, and prevent or reduce accidents. Different models of CNC lathes and demands of day-to-day maintenance of the content is not exactly the same as for the specific machine tool, should be provided for the implementation of the specification.

     The following is a list with some common elements of routine maintenance.

     1. Noodles every day to do a good job of cleaning the rail lubrication, automatic lubrication system to regularly check the machines, automatic lubrication system cleaning, check the oil, add the oil in time to check whether the timing pump to start and stop打油.

     2. Every day to check spindle box self-lubricating system is normal, regular replacement of spindle box lubricants.

     3. Pay attention to check the electrical cabinet cooling fan is working properly, whether or not duct plug filters, cleaning the dust沾附.

     4. Attention to check the cooling system, check the liquid height, in time to add oil or water, oil and water need to be replaced when dirty to clean.

     5. Attention to check the spindle drive belt, adjust the degree of tightness.

     6. Pay attention to check the guide be set too tight or too loose, adjust gap.

     7. The attention of the hydraulic machine to check whether the system fuel tank fuel pump abnormal noise, high oil job whether it is suitable to pressure gauge indicates whether normal joints and the availability of pipeline leaks.

     8. Attention to check the guide, complete machine is an effective shield.

     9. Attention to check the accuracy of mechanical moving parts to reduce the deviation of the shape and location.

     10. Off to do a good job every day cleaning machine hygiene, cleaning iron, rub rail static parts of the cooling fluid, to prevent rust Guide